개발보드 선택 가이드

Board Name 주요기능 Description Main IC / Module
ESP-EYE 카메라, 얼굴인식 ESP-EYE is a development board for image recognition and audio processing, which can be used in various AIoT applications. It features an ESP32 chip, a 2-Megapixel camera and a microphone. ESP-EYE offers plenty of storage, with an 8 Mbyte PSRAM and a 4 Mbyte flash. It also supports image transmission via Wi-Fi and debugging through a Micro-USB port. ESP32
ESP32-DevKitC 기본 개발보드 ESP32-DevKitC is an entry-level development board. It has all the ESP32 pins exposed and is easy to connect and use. ESP32-WROOM-32D
ESP32-PICO-KIT ESP32-PICO-D4 용 ESP32-PICO-KIT is Espressif’s smallest development board, as it fits into a mini breadboard. It is fully functional with the minimum number of discrete components, while it has all the ESP32 pins exposed. ESP32-PICO-D4
ESP32-LyraT 오디오 The ESP32-LyraT development board is designed for the speech and voice recognition market. It integrates the ESP32-WROVER-B module, which includes a dual-core processor and 4.5 MB of operating memory. With this development board, only few peripheral devices are required for implementing a highly-integrated audio solution. ESP32-WROVER-B
ESP32-LyraT-Mini 오디오 ESP32-LyraT-Mini is a lightweight audio development board based on ESP32-WROVER-B, which implements AEC, AGC, NS WWE (wake word engine) and other audio signal processing technologies. ESP32-WROVER-B
ESP32-LyraTD-DSPG 오디오, 음성인식, DSPG Audio DSP ESP32-LyraTD-DSPG is based on ESP32-WROVER-B, a BT/Wi-Fi combo module, and a digital signal processor (DSP) that features a three-microphone array for noise reduction, echo cancellation, beamforming and wake-word detection. ESP32-LyraTD-DSPG is integrated with peripheral devices and consists of two development boards. The sub board mainly consists of the microphone array, function keys and LEDs. The main board is integrated with power management, Wi-Fi and audio modules like dsp, codec and power amplifier. The two boards can be connected with FPC. ESP32-WROVER-B
ESP32-LyraTD-SYNA 오디오, 음성인식, Synaptics Audio DSP ESP32-LyraTD-SYNA is one of Espressif’s Audio Development Board based on ESP32 MCU and Synaptics DSP. It is an Acoustic Echo Cancelation (AEC) solution, supporting voice recognition and voice wake-up. It also supports connection to Amazon’s AVS (Alexa Voice Service), Google’s Dialogflow and Google’s GVA (Google Voice Assistant). ESP32-WROVER-B
ESP32-LyraTD-MSC 오디오, 음성인식, Mircosemi Audio DSP ESP32-LyraTD-MSC, one of Espressif’s Audio Development Boards, is an Acoustic Echo Cancelation (AEC) solution supporting voice recognition, near-field and far-field voice wake-up. Audio files in the format of AAC, FLAC, OPUS and OGG can be decoded and output without quality loss. It also supports connection to Baidu’s DuerOS and Amazon’s Alexa Voice Service (AVS). ESP32-WROVER-B
ESP-WROVER-KIT-VB 확장형 개발 보드, LCD, SD card The ESP-WROVER-KIT-VB is a variant of ESP-WROVER-KIT that comes with an ESP32-WROVER-B module by default. This board features support for an LCD and MicroSD card. The I/O pins have been broken out from the ESP32-WROVER-B for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 module through the USB interface. The development board makes secondary development easy and cost-effective. ESP32-WROVER-B
ESP32-LCDKit HMI, GUI 개발 보드 ESP32-LCD-Kit is an HMI (Human Machine Interface) development board based on ESP32-DevKitC (need to purchase if you didn’t have one). ESP32-LCDKit is integrated with such peripherals as SD-Card, DAC-Audio, and can be connected an external display. The board is mainly used for HMI-related development and evaluation.Development board reserved screen interface type: SPI serial interface, 8-bit parallel interface, 16-bit parallel interface. ESP32-DevKitC
ESP32-Ethernet-Kit Ethernet, PoE ESP32-Ethernet-Kit is an ESP32-based development board produced by Espressif.It consists of two development boards, the Ethernet board A and the PoE board B, The Ethernet board contains Bluetooth / Wi-Fi dual-mode ESP32-WROVER-B module and IP101GRI, a Single Port 10/100 Fast Ethernet Transceiver (PHY). The PoE board (B)  provides power over Ethernet functionality. The A board can work independently, without the board B installed. ESP32-WROVER-B
ESP-Launcher ESP8266EX IC 개발보드 ESP-Launcher is a Micro USB-powered development board that allows access to all 32 pins of ESP8266. It integrates the commonly-used peripherals. ESP8266EX
ESP8266-DevKitC ESP8266 기본 개발보드 ESP8266-DevKitC is an Espressif compact development board based on ESP8266 modules. All of the I/O pins of the module are broken out to the female header connectors on both sides of the board for easy interfacing. Developers can connect these pins to peripherals as needed. ESP-WROOM-02D
ESP32-Sense Kit 정전용량 터치 개발보드 The ESP32 touch sensor development kit, ESP32-Sense Kit, is used for evaluating and developing ESP32 touch sensor system. ESP32-Sense Kit consists of one motherboard and multiple daughterboards. The motherboard contains a display unit, a main control unit and a debug unit. The daughterboards have touch electrodes in different combinations or shapes, such as linear slider, wheel slider, matrix buttons and spring buttons, depending on the application scenarios. ESP32-WROOM-32D
ESP32-MeshKit-Sense 멀티 센서 개발 보드 ESP32-MeshKit-Sense is a development board with an ESP32 module at its core. It features peripherals, such as a temperature and humidity sensor, an ambient light sensor, etc. The board can be interfaced with screens. The board is mainly used to detect the current consumption of ESP32 modules in a normal operation state or in sleep mode, when connected to different peripherals. ESP32-WROOM-32D
ESP-Prog 프로그래머, 디버거 ESP-Prog is one of Espressif’s development and debugging tools, with functions including automatic firmware downloading, serial communication, and JTAG online debugging. ESP-Prog’s automatic firmware downloading and serial communication functions are supported on both the ESP8266 and ESP32 platforms, while the JTAG online debugging is supported only on the ESP32 platform. ESP-Prog uses FT2232HL as its USB Bridge Controller chip.